How to setup SCW GO Mobile App for iPhone (Part 2)

In this episode of In the Trenches, SCW’s expert discusses adding your SCW NVR or Camera System to your SCW GO App.

Our speaker today is:

Andrew

Andrew:

Hi, this is Andrew with SCW Tech Support again, and in our last video we talked about how to sign up in our app, and now we need to complete step two, which we'll be adding our camera system to our app. So we're going to go ahead and get started. We're going to go over to the sidebar at the top left button, and we're going to go to devices. Now we're going to click the plus add at the top of the screen. You may see a demo system preloaded in your app. You can go ahead and delete that one. Then we're going to press scan. On the next screen. You're going to get a prompt to access the camera. This is fine. This is just to take a photo. And next you're going to get a prompt to scan the QR code on the device body. So at this point, we can scan the sticker off the side of the MVR, and this is going to register our device under our account.

At this time, we can select the top field where it says my device, and we can edit this and name our camera system. You are able to add multiple systems to this over time, so you're going to want to name them. And then we're going to press the save key at the very top right, and at this time it'll say device has been added. The secondary way to add this to your phone app is going to be from the direct monitor television that you have hooked to the device. So at that point, we're going to pull up our screen here and we're going to right click on the screen and then we're going to left click menu. We're going to navigate over to the network option, and then what we're looking for is P two P at the very top. This is going to be our second section. We can scan the QR code in which once the device is registered, you will see an online message and we're all done.